Dissimilar joint characteristics of SiC and WC-Co alloy by laser brazing

Kimiaki Nagatsuka, Yoshihisa Sechi, Kazuya Nakata

Journal of Physics Conference Series · 2012 · 15 citations · 24 references

DOIFull text

Open access

Concepts

Abstract

SiC and WC-Co alloys were joined by laser brazing with an active braze metal. The braze metal based on eutectic Ag-Cu alloy with additional Ti as an active element ranging from 0 to 2.8 mass% was sandwiched by the SiC block and WC-Co alloy plate. The brazing was carried out by selective laser beam irradiation on the WC-Co alloy plate. The content of Ti in the braze metal was required to exceed 0.6 mass% in order to form a brazed joint with a measurable shear strength. The shear strength increased with increasing Ti content up to 2.3 mass%Ti and decreased with a higher content.

References

24