Journal of Applied Polymer Science · 2002 · 35 citations · 7 references
EngineeringMaterials EngineeringMaterials ScienceMembrane SciencePolymer ChemistryPolymer MaterialsMembrane CharacterizationMembrane EngineeringMembrane FabricationMembrane MaterialsMembrane ProcessingPolymer MembranesHollow Fiber Membrane FabricationHollow Fiber MembranesMembrane Fabrication TechniquesMicroporous Membranes
Abstract Microporous polyethylene (PE) hollow fiber membrane with a porosity of 43% and N 2 permeation of 4.96 cm 3 (STP)/cm 2 s cmHg was prepared by melt‐spinning and cold‐stretching method. It was found that PE with a density higher than 0.96 g/cm 3 should be used for the preparation of microporous PE hollow fiber membranes. By increasing the spin–draw ratio, both the porosity and the N 2 permeation of the hollow fiber membranes increased. Annealing the nascent hollow fiber at 115°C for 2 h was suitable for attaining membranes with good performance. By straining the hollow fiber to higher extensions, the amount and size of the micropores in the hollow fiber wall increased, and the N 2 permeation of the membranes increased accordingly. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 203–210, 2002; DOI 10.1002/app.10305
7
Encyclopedia of polymer science and engineering
C.S.H. Bawn · Polymer · 1987 · 4.2K citations
Natural Sciences, Materials Engineering, Materials Science +12
Enzyme Catalysed Preparation of 6-<i>O</i>-Acylglucopyranosides
Kim Adelhorst, Fredrik Björkling, Sven Erik Godtfredsen et al. · Synthesis · 1990 · 190 citations