All Days · 2002 · 41 citations · 5 references
EngineeringGeological EngineeringPetroleum EngineeringDrillingTime Series AnalysisWell LoggingDigital Signal ProcessingGeophysical Data ProcessingGeophysical Signal ProcessingNoise MeasurementNoise PredictionPressure Transient AnalysisData ProcessingNonlinear RegressionNonlinear Regression ModelsPermanent Downhole MonitoringPressure Response AnalysisWavelet AnalysisWavelet Denoising
Abstract One of the major issues in processing permanent downhole gauge (PDG) data is that there exist too many transients over a reasonable time period, say six months. A formula has been proposed to predict the transients that may be detected or missed. Reasonable prediction has been achieved via the formula. Noise usually exists in data recorded by permanent downhole gauges. Denoising is thus one of the most important steps in PDG data processing. In order to denoise the data, data noise level must be estimated beforehand. Unfortunately, the data noise level is typically case-dependent, therefore, it is impossible to identify a universal value for the level that may be used for all the application scenarios. One appropriate approach to estimate the noise level is to first best fit the data, subtract predicted pressure response from recorded values, and then calculate the noise level based on the difference1. We proposed to apply nonlinear regression via Polytope method2 for best-fitting PDG data to determine the noise level. It is found that the new approach is superior to the least square error (LSE) linear regression as used by Khong1, because the bottomhole wellbore pressure response in a well should be treated as a nonlinear function of time over majority of the well production/injection/shut-in period. Unless very small range of the data (say 2 hours) is considered, linear pressure response with time is not anticipated. Furthermore, with nonlinear regression through the Polytope approach, there is no strong restriction in data quantity and data density, hence, automatic detection of data noise level can be implemented. Other improvements to the PDG data processing procedure, such as trend analysis, steamlinization of data preprocessing, step outlier removal, and so on, will also be discussed.
5
Reuven R. Levary · European Journal of Operational Research · 1982 · 4.2K citations
PERMANENT DOWNHOLE GAUGE DATA INTERPRETATION
Khong Chee Kin · 2001 · 18 citations