Journal of Engineering for Gas Turbines and Power · 2015 · 42 citations · 10 references
EngineeringAutomotive EngineeringMechanical EngineeringCombustionComputational Fluid DynamicsInternal Combustion EnginesCombustion ProcessesEngine ModelingEngine PerformanceFour-stroke EnginesIgnitionSpark-ignition EnginesDirect Fuel InjectionDirect Injection CombustionEngine Combustion ModelingFuel InjectionFuel Injection ModelingHydrogen Fuel InjectionNumerical SimulationSpark-ignition Engine Modeling
This paper reports the validation of a three-dimensional numerical simulation of the mixture preparation in a direct-injection (DI) hydrogen-fueled engine. Computational results from the commercial code CONVERGE are compared to the experimental data obtained from an optically accessible engine. The geometry used in the simulation is a passenger-car sized, four-stroke, and spark-ignited engine. The simulation includes the geometry of the combustion chamber as well as the intake and exhaust ports. The hydrogen is supplied at 100 bar from a centrally located injector with a single-hole nozzle. The comparison between the simulation and experimental data is made on the central vertical plane. The fuel mole concentration and flow field are compared during the compression stroke at different crank angles (CA). The comparison shows good agreement between the numerical and experimental results during the early stage of the compression stroke. The penetration of the jet and the interaction with the cylinder walls are correctly predicted. The fuel spreading is under predicted which results in differences in flow field and fuel mixture during the injection between experimental and numerical results. At the end of the injection, the fuel distribution shows some disagreement which gradually increases during the rest of the simulation.
10
P. K. Senecal, K. J. Richards, Eric Pomraning et al. · SAE technical papers on CD-ROM/SAE technical paper series · 2007 · 312 citations
Engineering, Computational Engineering, Mechanical Engineering +14
Riccardo Scarcelli, Thomas Wallner, Nicholas S. Matthias et al. · SAE International Journal of Engines · 2011 · 110 citations
Engineering, Aerospace Engineering, Mechanical Engineering +17