Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2010 · 17 citations · 20 references
EngineeringComputational EngineeringMechanical EngineeringComputational MechanicsFinite Element AnalysisStructural EngineeringStructural Finite Element AnalysisStructural Health MonitoringVibration AnalysisVibration MeasurementVibration MonitoringVibration TestingComputational Prediction ModelsFinite Element Model ValidationLamb WavesLaser ScanningStructural Health Monitoring SimulationStructural MonitoringVelocity ComponentsVelocity Time Histories
Lamb waves are being explored for structural health monitoring (SHM) due to their capability of detecting relatively small damage within reasonably large inspection areas. However, Lamb wave behavior is fairly complex, and therefore, various computational techniques, including finite element analysis (FEA), have been utilized to design appropriate SHM systems. Validation of these computational models is often based on a limited number of measurements made at discrete locations on the structure. For example, models of pitch-catch of Lamb waves may be validated by comparing predicted waveform time histories at a sensor to experimentally measured results. The use of laser Doppler vibrometer (LDV) measurements offers the potential to improve model validation. One-dimensional (1D) LDV scans provide detailed out-of-plane measurements over the entire scanned region, and checks at discrete sensor locations can still be performed. The use of three-dimensional (3D) laser vibrometer scans further expands the data available for correlation by providing in- and out-of-plane velocity components over the entire scanned region. This paper compares the use of 1D and 3D laser vibrometer data for qualitatively and quantitatively validating models of healthy metallic and composite plates.
20