<title>Study of gamma-ray detector performance of Cd<formula><inf><roman>1-x</roman></inf></formula>Zn<formula><inf><roman>x</roman></inf></formula>Te crystal treated by different etchants</title>

Henry Chen, Stephen U. Egarievwe, Zhiyu Hu, J. Tong, D. T. Shi, Guangda Wu, Kuo‐Tong Chen, M. A. George, W. E. Collins, A. Bürger,

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 1996 · 19 citations · 0 references

Concepts

Abstract

Radiation detectors have been fabricated from Cd<SUB>1-x</SUB>Zn<SUB>x</SUB>Te crystals and their performance has been studied with respect their Cd<SUB>1-x</SUB>Zn<SUB>x</SUB>Te surface preparation. Energy resolution, leakage current, resistivity, ohmicity as well as surface roughness of the detectors were measured and compared for various chemical treatments. Etching in lactic acid has been found to lead to better ohmic contract, a rougher surface and higher leakage current. Bromine is effective in removing the damaged layer and when added to 20 percent lactic acid in ethylene glycol leads to a lower leakage current and consequently a better energy resolution. The best detector performance was obtained with a two step treatment consisting of a standard etchant (5 percent Br in methanol) followed by 2 percent Br in'20 percent lactic acid in ethylene glycol'. The results clearly demonstrate the important of surface chemical treatments in the fabrication of Cd<SUB>1-x</SUB>Zn<SUB>x</SUB>Te radiation detectors.