IEEE Transactions on Applied Superconductivity · 2013 · 16 citations · 4 references
EngineeringElectrical EngineeringPhysicsElectromagneticsElectromagnetismInstrumentationElectrical InstallationElectrical System TestingElectromagnetic CompatibilityField TestingSuperconducting Magnet SystemsCoil DesignHigh-temperature SuperconductorsHigh-temperature TestingMagnet TestingMagnetic Field DistributionMagnetic Field Measurements
The EDIPO test facility is erected at CRPP Villigen with the aim of providing a flexible, high field test bed for high current force flow superconductors. The EDIPO main coil is a tilted-head race-track pair wound by a graded Nb3Sn cable-in-conduit conductor. The whole project, partly funded by the European Commission, started in 2004 and entered the commissioning phase in 2013. The final steps of instrumentation and installation of the main coil, delivered by industry in May 2011, lasted about 18 months. The first cool-down of the facility started in November 2012. The commissioning of the main coil, including the precise measurement of the generated magnetic field, was carried out in March 2013. At an operating current of 17.2 kA, a ± 1% homogenous field of 12.35 T was generated over a length of 900 mm in the center of the test well, 140 mm × 91 mm in cross section. Details about cool-down, flux jumps, forces and displacements, field map, and charging rate are presented in this paper.
4
Upgrade of operating range for SULTAN test facility
P. Bruzzone, A. Anghel, A.M. Fuchs et al. · IEEE Transactions on Applied Superconductivity · 2002 · 141 citations · Full text
Development of the EFDA Dipole High Field Conductor
A. Vostner, P. Bauer, R. Wesche et al. · IEEE Transactions on Applied Superconductivity · 2008 · 40 citations · Full text
Natural Sciences, Electrical Engineering, Materials Science +14
Design and optimization of the 12.5T EFDA dipole magnet
A. Portone, E. Salpietro, L. Bottura et al. · Cryogenics · 2006 · 32 citations · Full text
Test results of the 18 kA EDIPO HTS current leads
R. Wesche, M. Bagnasco, P. Bruzzone et al. · Fusion Engineering and Design · 2011 · 20 citations · Full text