Journal of Applied Polymer Science · 1984 · 23 citations · 17 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ProcessingPolymer ChemistryPolymer MaterialsComposite MaterialsFiber PropertiesThermosetsCarbon Fiber MaterialsCarbon FibersComposite Mechanical PropertiesFiber EngineeringFiber PretreatmentFibersMechanical StrengthTensile Strength
Abstract Carbon fibers having good mechanical properties were produced from syndiotactic 1,2‐polybutadiene (s‐PB). Melt‐spun s‐PB fibers were made infusible by oxidation, irradiation, or treatments with Lewis acids, protonic acids, or peroxides. The infusibilized fibers were dehydrogenated with oxygen, chloranil, or sulfur and then carbonized. The preparative method by the AlBr 3 –sulfur–heat treatment process gave carbon fibers with good mechanical strength in a high yield. A filaments bundle was immersed in a benzene solution of AlBr 3 (2g/100mL) at 42°C for 78 min under tension, washed with methanol, and then immersed in molten sulfur at 275°C for 14 min. After the adhering sulfur was purged with nitrogen at 290°C for 7 min, the bundle was heated up to a temperature of 700–3000°C under tension in a flow of nitrogen or argon for a few minutes. Carbon fibers heated to 1400°C were obtained with the tensile strength of 16.6 t/cm 2 and the modulus of 1420 t/cm 2 in a carbon yield of 82% and strain‐graphitized fibers at 3000°C with 20 t/cm 2 and 4010 t/cm 2 in 70%.
17
Chemistry and physics of carbon
Victor R. Deitz · Journal of Colloid and Interface Science · 1970 · 502 citations
Natural Sciences, Chemistry, Physics +10
Carbon Fibres of High Strength and High Breaking Strain
R. Moreton, W. Watt, William H. Johnson · Nature · 1967 · 109 citations
Natural Sciences, Materials Engineering, Materials Science +16
Carbon work at the royal aircraft establishment
Hidetomo Ashitaka, Hideo ISHIKAWA, Haruo Ueno et al. · Journal of Polymer Science Polymer Chemistry Edition · 1983 · 82 citations