Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches

References

Page 1

	Year	Citations
VI. The phenomena of rupture and flow in solids Alan Arnold Griffith Philosophical Transactions of the Royal Society of London Series A Containing Papers of a Mathematical or Physical Character	1921	10.5K
Analysis of Stresses and Strains Near the End of a Crack Traversing a Plate G. R. Irwin Journal of Applied Mechanics EngineeringRapid FractureStrain LocalizationMechanicsFracture Arrest	1957	5.3K
On the Crack Extension in Plates Under Plane Loading and Transverse Shear F. Erdoğan, G. C. Sih Journal of Basic Engineering EngineeringMechanical EngineeringLarge PlateDynamic Crack PropagationFracture Modeling	1963	4.7K
On the Stress Distribution at the Base of a Stationary Crack M. L. Williams Journal of Applied Mechanics EngineeringFracture OptimizationMechanical EngineeringStationary CrackFracture Modeling	1957	3.3K
Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in Extension M. L. Williams Journal of Applied Mechanics EngineeringElasticity (Physics)MechanicsBending CaseMechanical Engineering	1952	2.4K
Strain-energy-density factor applied to mixed mode crack problems G. C. Sih International Journal of Fracture EngineeringMechanicsMechanical EngineeringStressstrain AnalysisStrain-energy-density Factor	1974	2.2K
On the relationship between critical tensile stress and fracture toughness in mild steel Robert O. Ritchie, J. F. Knott, J. R. Rice Journal of the Mechanics and Physics of Solids Materials ScienceCritical Tensile StressEngineeringFracture ToughnessStrength Property	1973	1.5K
Bearing Pressures and Cracks: Bearing Pressures Through a Slightly Waved Surface or Through a Nearly Flat Part of a Cylinder, and Related Problems of Cracks Harald Westergaard Journal of Applied Mechanics EngineeringMechanical EngineeringBearing PressuresSlightly Waved SurfaceContinuum Mechanic	1939	1.3K
The cohesive zone model: advantages, limitations and challenges M. Elices, Gustavo V. Guinea, F.J. Gómez, Engineering Fracture Mechanics Community DevelopmentRegional CollaborationInterorganizational RelationshipManagementBusiness	2002	1.2K
Stresses in a plate due to the presence of cracks and sharp corners Ce Inglis Medical Entomology and Zoology EngineeringSharp CornersStrain LocalizationMechanicsMechanical Engineering	1913	1.1K

Page 1