Science and Technology of Advanced Materials · 2003 · 109 citations · 13 references
Natural SciencesChemical EngineeringChemistryPolymer ChemistryPolymer MaterialsSurface ScienceGelsPolymer CharacterizationPolymer SurfacesAerogelsChemical ModificationChemical Surface ModificationContact Angle MeasurementsSol-gel ProcessingSol-gel SystemsSolvent Extraction Chemistry
In the present paper, the experimental results on the physical and hydrophobic properties of tetraethoxysilane (TEOS) based silica aerogels using six different organosilane co-precursors (C.P) of the type RnSiX4-n as synthesis components, are reported and discussed. The aerogels have been produced by sol-gel processing followed by supercritical drying using methanol solvent extraction. The molar ratio of TEOS, ethanol (EtOH), water (0.001M oxalic acid (H2C2O4) catalyst) was kept constant at 1:5:7, respectively, and the molar ratio of C.P/TEOS (A) was varied from 0.1 to 0.6 and compared the aerogel properties. The hydrophobicity of the aerogels has been tested by the contact angle measurements. The contact angle (θ) has been found to be the highest (θ =136˚) for the trimethylethoxysilane (TMES) co-precursor, while for the other co-precursors it is in between 12˚8 and 13˚8. The surface chemical modification of the hydrophobic aerogels has been studied using Fourier Transform Infrared Spectroscopy (FTIR). As the C.P/TEOS molar ratio increased, the intensity of the C–H and Si–C peaks in the FTIR spectra increased, clearly indicating the organic modification of the aerogels. The aerogels based on mono-alkyl (CH3) trialkoxysilane co-precursor have shown higher optical transmission (≈65%) compared to the phenyl, di or tri alkyl alkoxysilanes (5–50%). The trialkyl modified aerogels showed the lowest bulk density (118.3 kg/m3) and volume shrinkage (<2%). The alkyl alkoxy/chloro–silane modified aerogels have been found to be thermally stable up to a maximum temperature of 573 K, whereas the phenyl trialkoxysilane modified aerogels are stable up to a temperature as high as 823 K. The aerogels have been characterized by scanning electron microscopy, thermogravimetric and differential thermal analyses.
13
The Physics of Flow Through Porous Media
Adrian E. Scheidegger · Soil Science · 1958 · 2.6K citations