Inflow Performance of Horizontal Wells in Multilayer Reservoirs

Fikri J. Kuchuk, Jawaid Saeedi

SPE Annual Technical Conference and Exhibition · 1992 · 13 citations · 12 references

Concepts

Abstract

Abstract The inflow performance formulas for horizontal wells presented in the literature are all for single-layer reservoirs. This paper presents formulas for evaluating the inflow performance of horizontal wells in vertically layered reservoirs with crossflow. The system has a rectangular drainage region in the x and y directions and is bounded at the top and the bottom by horizontal planes with no-flow and/or constant-pressure boundary conditions. The well is located anywhere within the drainage volume and could be of any length. Analytical models for dynamic (transient), pseudosteady-state, and steady-state productivity indices for horizontal wells in layered and bounded reservoirs are developed. They may also be used for the analysis of transient pressure or flow rate data, and both from horizontal wells in bounded systems. We present a method for the selection of the well location in a layered system for maximizing the productivity index. We also show that in a layered system with variable vertical permeability distribution, the proper selection of the well location is important for maximizing the productivity. The layering effect for most systems may not be treated as a single layer with average properties. The vertical permeability of each layer is the controlling parameter for the productivity. The productivity model developed may be used as a screening tool before or during drilling to obtain the best well location for a horizontal well. It can also be used to fine-tune numerical simulators for horizontal wells in layered systems.

References

12