Dynamics of Solid Dispersions in Oil During the Lubrication of Point Contacts, Part II—Molybdenum Disulfide

Abstract

Abstract The dynamics of MoS2 particles in a mineral oil dispersion are studied in the same manner as reported in Part I for graphite dispersions. A Hertzian contact consisting of a steel ball in contact with a glass disk is lubricated with MoS2 dispersions and observed by optical microscopy at various. slide/roll conditions. In general, the behavior of MoS2 and graphite are similar. That is, the solids lend to enter the contact and form a film on the contacting surfaces whenever a rolling component of motion is used, but solid particles seldom enter the contact during pure sliding. MoS2 has more pronounced plastic flow behavior than graphite. However, the polished steel ball is more readily scratched by MoS2 than by graphite. Under the conditions of these studies, lower friction and wear are observed with pure oil rather than with the dispersions. However, under other conditions (such as different contact geometry or rougher surfaces), the solid-lubricant dispersions might be beneficial. Presented at the 36th Annual Meeting in Pittsburgh, Pennsylvania May 11–14, 1981 Notes Presented at the 36th Annual Meeting in Pittsburgh, Pennsylvania May 11–14, 1981