Toughening of a Particulate‐Reinforced Ceramic‐Matrix Composite by Thermal Residual Stress

Minoru Taya, Shinya Hayashi, A. S. Kobayashi, Hi-Seak Yoon

Journal of the American Ceramic Society · 1990 · 509 citations · 30 references

Concepts

TL;DR

The study analyzes the micromechanics of how TiB₂ particulates increase crack‑growth resistance in a SiC matrix through experimental and theoretical investigation. Thermal residual stresses arise from coefficient‑of‑thermal‑expansion mismatch between TiB₂ and SiC upon cooling, and the crack‑growth resistance depends on particulate and void volume fractions. The composite exhibits a 77 % higher crack‑growth resistance than monolithic SiC, matching a 52 % analytical prediction, while crack deflection alone accounts for only 14 % and the residual stresses counteract tensile attraction to particulates.

Abstract

The micromechanics involved in increased crack growth resistance, K R , due to the addition of TiB 2 particulate in a SiC matrix was analyzed both experimentally and theoretically. The fractography evidence, in which, the advancing crack was attracted to adjacent particulates, was attributed to the tensile region surrounding a particulate. Countering this effect is the compressive thermal residual stress, which results in the toughening of the composite, in the matrix. This thermal residual stress field in a particulate‐reinforced ceramic‐matrix composite is induced by the mismatch in the coefficients of thermal expansion of the matrix and the particulate when the composite is cooled from the processing to room temperature. The increase in K R of the composite over the monolithic matrix, which was measured by using a hybrid experimental‐numerical analysis, was 77%, and compared well with the analytically predicted increase of 52%. The increase in K R predicted by the crack deflection model was 14%. Dependence of K R on the volume fraction of particulates, f p , and of voids, f v , is also discussed.

References

30