Energy Procedia · 2009 · 151 citations · 9 references
EngineeringChemical EngineeringMaterials EngineeringCombustionInorganic ChemistryPetrologyEnergy ConversionFluidized Bed ReactorsFuel ChemistryIgneous MineralsCombustion In Fluidized Bed ReactorsFluidized Bed CombustionFluidized-bed Reactor DesignFuel Composition EffectsGas MixturesHydrocarbon ConversionNatural GasNatural Gas Combustion
A first experimental campaign has been conducted at a 120 kW fuel power dual circulating fluidized bed installation for chemical looping combustion of gaseous fuels. In these test runs natural ilmenite (FeTiO 3 ) has been used as oxygen carrier material. The plant consists of two interconnected circulating fluidized bed reactors (stainless steel construction, inner diameter: 0.15 m, height: air reactor 4.1 m, fuel reactor 3 m). Variations of fuel composition (natural gas, synthetic gas mixtures of H 2 and CO), load, temperature and solids circulation rate have been performed for the bulk bed material. Further, natural olivine, (Fe,Mg) 2 SiO 4 , has been studied as an additive to increase hydrocarbon conversion. Despite the limited height of the risers, the results show reasonable fuel conversion for CO and H 2 at 950 ∘ C. The conversion of natural gas, i:e. CH 4 , on the other hand, is relatively low for the pure ilmenite material at about 30–40%. A certain dependency of fuel conversion on load is found especially for CH 4 . Addition of natural olivine results in a moderate increase of CH 4 conversion.
9
Science in Thermal and Chemical Biomass Conversion
X. Zhang, J. Heikkinen, Wiebren de Jong et al. · 2006 · 186 citations