A new direct matrix inversion method

R. Bruce Shipley, Dorothy Coleman

Transactions of the American Institute of Electrical Engineers Part I Communication and Electronics · 1959 · 39 citations · 0 references

Concepts

TL;DR

The technique is specialized and not fully general, yet adequate for most power system applications. The paper introduces a special‑purpose matrix inversion technique developed by TVA’s System‑Planning Branch. The method targets impedance or admittance matrices, requiring division by non‑zero major‑diagonal elements. It is the first documented use; the program alters calculation order when a diagonal element is zero, but a zero in the final diagonal renders the matrix singular.

Abstract

This paper describes a special-purpose matrix inversion technique developed in the System-Planning Branch of TVA (Tennessee Valley Authority). This is the first known use of the method. It is particularly applicable to the inversion of matrices that describe power system impedances or admittances. As outlined, the technique is not entirely general. It requires division by elements of the major diagonal. Thus, when the element is being used as a divisor, it must not be zero. Under such a condition the digital program changes the sequence of calculations. However, a zero in the final diagonal position to be used will cause the matrix to be considered singular. The technique can be made more general but this is not necessary for most power system work.