Effects of Temperature and Hole Drilling on Adhesively Bonded Single-Lap Joints

Volkan Arıkan, Akar Doğan, Tolga Dogan, Eray Sabancı, Adel Kadum Jassim Al-Shamary

The Journal of Adhesion · 2013 · 20 citations · 9 references

Concepts

Abstract

In this study, the load-carrying capacity of a single-lap joint bonded by an adhesive was determined experimentally. Glass fiber-epoxy composite material was chosen as adherends and Loctite® 9466 A&B2 was used as adhesive. The vacuum assisted resin infusion method (VARIM) was used to manufacture composites. In this experimental study, the effects of hole drilling and temperature were investigated. Five hole configurations and three temperatures (room temperature, 50°C, and 80°C) were considered. The results show that hole drilling elevate the failure load and when the temperature increases the load-carrying capacity decreases.

References

9