Formation of acicular ferrite at oxide particles in steels

Frank Barbaro, P. Krauklis, K. E. Easterling

Materials Science and Technology · 1989 · 183 citations · 5 references

Concepts

TL;DR

Acicular ferrite characteristics depend on prior austenite grain size and cooling rate. Experimental steels were prepared from weld metal deposits to study acicular ferrite formation under heat‑affected‑zone conditions, and a simplified quantitative model relating grain size, cooling rate, and oxide inclusion distribution was supported by limited welding trials. Acicular ferrite formation depends on a suitable distribution of oxide inclusions larger than 0.4 µm, and metallographic evidence shows a two‑stage process: large primary plates nucleate at intragranular inclusions, followed by growth of many smaller grains from these plates.

Abstract

Experimental steels similar in composition to structural grades were prepared from weld metal deposits to study the formation of acicular ferrite under conditions experienced in the heat affected zone for a range of welding processes. The formation of acicular ferrite under these conditions is found to be dependent on the presence of a suitable distribution of oxide inclusions > 0·4 μm in size. The characteristics and proportion of acicular ferrite in the microstructure also depend on the prior austenite grain size and cooling rate. The relationship between these factors is presented in a simplified quantitative model, which is supported by data from limited welding trials. Metallographic observations suggest that acicular ferrite forms in two stages. The first involves the formation of relatively large primary acicular ferrite plates by multiple nucleation at intragranular inclusion sites, and the second involves the formation of many smaller acicular ferrite grains that grow sympathetically from the primary plates.MST/1027

References

5