Dynamic mechanical properties of polyurethane block polymers

D. S. Huh, Stuart L. Cooper

Polymer Engineering and Science · 1971 · 198 citations · 18 references

Concepts

Abstract

Abstract The dynamic mechanical properties of polyester and polyether urethane block polymers have been investigated at four frequencies (3.5, 11, 35 and 110 Hz) in the temperature range of — 150 to 200°C. The existence of a two phase structure was demonstrated in these systems by the observation of two major transition regions corresponding to (1) the glass transition temperature ( T g ) of the ester or ether soft segments, and to (2) the softening temperature of the aromatic‐urethane hard segments. Several secondary relaxations were observed in addition to the two major relaxations. It was possible to assign molecular mechanisms to each of these relaxations. All relaxation phenomena were greatly influenced by the molecular weight of the prepolymer, weight percent of hard segments, and thermal history. An increase in the molecular weight of the prepolymer above 1,000 at constant hard segment content resulted in a semi‐crystalline material, which possessed a lower T g for the macroglycol segments. Annealing to enhance crystallinity increased the T g of the soft segments, consistent with the usual observation in semicrystalline homopolymers. These findings suggest that the relaxation mechanisms of polyurethane block polymers are not only influenced by the degree of crystallinity, but also by the nature of the domain structure.

References

18