Fabrication of superoleophobic hierarchical surfaces for low-surface-tension liquids

Abstract

This study demonstrates the fabrication of hierarchical surfaces with super-repellency even for low-surface-tension liquids, including octane (surface tension of 21.7 mN m−1). Dual-pore surfaces were prepared by a combination of practical wet processes on an aluminium substrate: chemical etching, anodizing, and organic monolayer coating. The size of the larger pores formed by the chemical etching of aluminium is controlled by the concentration of HCl in the CuCl2/HCl etching solution. The etched aluminium is then anodized to introduce nanopores, followed by a pore-widening treatment that controls the nanopore size and porosity. The repellency for low-surface-tension liquids is enhanced by increasing the size of the larger pores as well as the porosity of the walls of the larger pores in this dual-pore morphology. Under optimized morphology with a fluoroalkyl-phosphate monolayer coating, an advancing contact angle close to 160°, a contact angle hysteresis of less than 5° and a sliding angle of 10° is achieved even for octane.