CORROSION · 1958 · 44 citations · 3 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceMechanical Behavior Of MaterialsMetallurgyCorrosion EngineeringCorrosion EvaluationCorrosion Of SteelsCorrosion TestingCorrosion-resistant MaterialsCrack AssessmentCarbon DioxideCorrosion Failure AnalysisHydrogen Sulfide CorrosionProbit RegressionSteelsSulfide Stress Cracking
Quantitative procedures for sulfide corrosion cracking tests, both in the laboratory and in the field, have been developed. The statistical techniques of probit analysis have been adapted for use with cracking test data so as to make optimum use of a minimum number of tests. Analysis of the data from laboratory tests yields a number which is called the critical strain, Sc. This is the strain at which the probability of failure under the specific test conditions used is one-half. Very susceptible steels have low Sc values whereas non-susceptible steels have high Sc values. The critical strain is a function not only of the alloy tested but also of the test environment and procedure. It is lowered by addition of acids (especially organic acids such as acetic) and carbon dioxide. Using alloys of varying Sc values, all tested at the same high strain, the relative severity of any given test environment (e.g., flow from a sour gas well) can be measured. Analysis of the data from field tests yields a severity rating, Rs, which is the critical strain of an alloy which would be expected to give 50 percent failures in test. High Rs values are associated with severe test environments and low Rs values with mild environments. This general method may be adaptable to other stress corrosion systems, and thus provide a quantitative means of expressing susceptibility to attack or severity of an environment. 2.3.7
3
The Behavior of Steels in Hydrogen Sulfide Environments
L. W. Vollmer · CORROSION · 1958 · 30 citations
Natural Sciences, Materials Engineering, Materials Science +17