International Journal of Chemical Reactor Engineering · 2003 · 11 citations · 0 references
Natural SciencesChemical EngineeringChemistryCatalysisIndustrial ChemistryReaction EngineeringCatalyst CharacterizationCatalytic MaterialsCatalytic Reaction EngineeringFuel ChemistryIndustrial Catalytic ProcessesReaction Process DesignAromatic HydrocarbonsCatalyst ActivityCatalytic CrackingFeedstock Material CharacterizationHydrocarbon CrackingHydrogen Content AnalysisOperational ConditionsPhysical Properties
Fluid Catalytic Cracking is a process conceived to produce gasoline as the main product. Feed stocks to the process are vacuum gas oils (VGO) showing boiling point ranges typically between 343°C and 538°C. Since these boiling range cut points are usually fixed, the carbon number range of encountered hydrocarbons is approximately constant and this is also true for the relative amounts of paraffins, naphthenes and aromatics, regardless of changes from feed to feed. Under FCC reaction conditions, each of the above hydrocarbon groups exhibit different crackability. In order to explain the existing relationship between feed composition and yields and quality of end products, it is necessary to establish the effect of composition and operational conditions on cracking behavior of feedstocks, expressed in terms of a relation between some specific properties, or as in our case, by its Reactive Hydrogen Content (RHC). Therefore, yields should then be dependent on three factors, RHC value, as a measure of feed quality, catalysts and applied operational conditions. In this work, a RHC for a series of feeds of known composition is determined and correlated to conversion and yields obtained under different operational conditions, using the same catalyst. The resulting correlations are then applied to unknown feeds with the RHC being calculated from physical properties, and yields.