IEEE Transactions on Industrial Electronics · 2013 · 73 citations · 30 references
EngineeringElectrical EngineeringMechanical EngineeringElectric MachinesMachine DesignPower ElectronicsDirect Current MachinesElectric DrivesElectric MotorsElectromagnetic Torque ProductionLosses In Electric MachinesPermanent Magnet MachinesFinite Element Analysis Of MachinesFinite Element ModelingFinite Element Torque AnalysisLow-speed OperationLow-speed OperationsThermal Management Of Electric MachinesTorqueTorque Density Optimization
This paper presents the simplified analytical optimization and comparison between electrically excited (EE) and permanent-magnet (PM) machines in terms of torque per volume T/V and torque per weight T/G for low-speed applications when their copper loss and overall size are the same. Analytical torque models for both machines are individually developed and optimized to obtain the optimal flux density ratio, split ratio, and maximum torque densities. Furthermore, the variation of optima with the number of poles and machine size is also investigated. The analytical analyses are validated by both finite-element analyses and experiments. It is concluded that torque densities of PM machines can be more than √2 times higher than those of EE machines. For EE machines, there is an optimal pole number to maximize torque densities, and large volume applications are preferred. In actual applications, EE machines are more likely to compromise the torque density to meet the thermal constraints. It also shows that the optimal T/G designs have significantly higher split ratio and are more cost- and weight-effective than the optimal T/V designs.
30
Massimo Barcaro, Nicola Bianchi, Freddy Magnussen · IEEE Transactions on Industrial Electronics · 2011 · 192 citations