UV‐Ozone Treatment on Cs<sub>2</sub>CO<sub>3</sub> Interfacial Layer for the Improvement of Inverted Polymer Solar Cells

Yusheng Xin, Zixuan Wang, Lu Xu, Xiaowei Xu, Yang Liu, Fujun Zhang

Journal of Nanomaterials · 2013 · 11 citations · 28 references

DOIFull text

Open access

Concepts

Abstract

Inverted configuration polymer solar cells (IPSCs) were prepared by using Cs 2 CO 3 modified indium tin oxide (ITO) substrates as cathode and MoO 3 /Al as anode, ITO/Cs 2 CO 3 /P3HT:PCBM/MoO 3 /Al. The interfacial Cs 2 CO 3 layers were conducted with annealing treatment and different time UV‐Ozone treatment. The power conversion efficiency (PCE) of IPSCs was improved to 1% when the UV‐Ozone treatment time is 15 minutes, with the open‐circuit voltage of 0.48 V, short‐circuit current density of 5.4 mA/cm 2 , and fill factor of 39%. The improvement of IPSCs should be attributed to the increased electron transporting and collection ability of Cs 2 CO 3 layer induced by UV‐Ozone treatment. The underlying mechanism of PCE improvement was discussed in terms of series and shunt resistance of cells induced by UV‐Ozone treatment on Cs 2 CO 3 layer, and the mole ratio of Cs to O of Cs 2 CO 3 layer with different UV‐Ozone treatment was investigated by scanning electron microscopy operating in the mode for in situ energy dispersive X‐ray (EDX) spectra.

References

28