SPE Annual Technical Conference and Exhibition · 2001 · 32 citations · 4 references
EngineeringEarth SciencesPetroleum EngineeringDrillingFormation EvaluationReservoir CharacterizationAcoustic LoggingDrilling HydraulicsFlow MeasurementFormation Evaluation While DrillingFracture CharacterizationMud LoggingAccuracyDrilling Fluids AnalysisElectromagnetic FlowmetersFluid Flow ProfilingFracturesNatural Fracture AnalysisNatural Fracture SystemsReservoir Permeability Analysis
Abstract Massive or small losses of drilling mud, flowing from the wellbore into surrounding formations, can be considered as good indicator of the natural fractures permeability and can be successfully used to support and integrate other detection methodologies. Most of the techniques currently used for natural fracture detection do not clearly differentiat e between fractures that allow fluid flow and those that do not. Image logs, for example, can accurately locate the presence of fractures but are unable to discriminate between open and closed fractures. The most commonly used techniques to detect the mud losses consist in monitoring the level of the mud pits with acoustic, floating sensors and/or using paddles set inside the flow line that measure the return mud flow rate with a small degree of accuracy. In the last years these sensors have been partially replaced by the more accurate electromagnetic flowmeters. These tools are able to measure the mud flow rate with an accuracy of around +/− 15–20 litres/min. The mud losses are now processed in time domain and no more in depth domain, permitting a better accuracy in the identification and location of the conductive (microlosses) events. Moreover, the analysis of the microloss shape can allow the identification of the event causing the losses (natural or induced fracture, matrix porosity etc.). The main advantages of using mud losses as permeability indicators can be summarised as follows: Direct information about reservoir permeability properties on a large volume of rock,Only conductive fractures are detected,Possibility of distinguishing damaged plugged up conductive fracture from impermeable ones,Inexpensive techniqueApplication and interpretation while drilling. Some case studies are presented in this paper, showing how the microloss monitoring and analysis can help and support the conventional Formation Evaluation in the detection and location of productive fractures.
4