Journal of Environmental Science and Health Part A · 2008 · 82 citations · 32 references
EngineeringChemical EngineeringEnvironmental EngineeringElectrochemistryWastewater TreatmentWater TreatmentElectroanalytical ChemistryElectrochemical TreatmentElectrode KineticsHeavy Metal RemediationHeavy Metal RemovalArsenic RemediationArsenic RemovalElectrochemical RemediationElectrocoagulationMetal Ion RemovalMetal RemediationPh Effects On Metal RemovalRemoval Efficiency
This study was undertaken to investigate the removal of arsenic (As) and chromium (Cr) from aqueous solution using electrocoagulation (EC) technique. Batch EC studies were performed using iron electrodes to evaluate the influence of various experimental parameters on the removal of metal ions. The parameters were initial pH (pH(0)), electrolysis time (t), initial concentration (C(0)), electrode gap (g), stirring rate (r) and current density (j). Effect of pH(0) was studied in the range 2.0 to 8.0 while C(0) was varied from 10 to 100 mg/L. As and Cr removal by EC was governed by the chemical dissolution of iron, and the formation of metal-hydrous ferric oxide complexes, which in turn was strongly, influenced by pH(0) and j. Optimum value of pH(0) and j for As and Cr removal were found to be 4.0 and 2.0; and 75 and 50 A/m(2), respectively. Removal efficiency increased with decrease in the value of C(0) and g. The r value of 100 rpm produced sufficient agitation for the proper agglomeration of flocs and optimum removal of ions.
32
Advanced inorganic chemistry: A comprehensive text.
George B. Kauffman · Polyhedron · 1989 · 792 citations
Removal of arsenic from water by electrocoagulation
P. Ratna Kumar, Sanjeev Chaudhari, Kartic C. Khilar et al. · Chemosphere · 2004 · 611 citations
Engineering, Chemical Engineering, Environmental Engineering +10