Chemistry of Materials · 2007 · 40 citations · 38 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsNanomaterialsCeramic CompositesCeramic ProcessingNanocompositesNanoparticle SynthesisNanoporous MaterialsPorous CeramicsCerium Oxide NanoparticlesCrystallizationEffective Particle DiameterHigh-surface-area MaterialsMesoporous MaterialsNanoparticlesSpecific Surface AreaSurface Area
Reverse microemulsions consisting of aqueous cerium nitrate solution as the internal phase and polycarbosilane dissolved in heptane as the continuous phase were used as a precursor for the controlled synthesis of dispersed cerium oxide particles inside a porous SiC matrix. According to dynamic light scattering experiments, the effective diameter of the cerium hydroxide particles obtained after ammonia addition is effectively controlled in a range of 2–10 nm with the molar water/surfactant ratio ( R w = 6–16). Pyrolysis at 1200 to 1500 °C produces materials with specific surface areas up to 240 m 2 g −1 . Whereas crystallization of the matrix is achieved only at higher temperature, cerium oxide particles form agglomerates composed of smaller nanoparticles that tend to dissolve into the ceramic matrix at 1500 °C leaving macropores behind. The high specific surface area is attributed to the presence of mesopores with a broad size distribution. Excess carbon present after pyrolysis is removed by oxidation at 900 °C causing a significant decrease of the surface area for high surface area materials, whereas intermediate surface area materials (50–100 m 2 g −1 ) show a high textural stability.
38
Ceria in automotive exhaust catalysts I. Oxygen storage
Haoyu Yao · Journal of Catalysis · 1984 · 1.8K citations
Natural Sciences, Chemical Engineering, Materials Science +14