Fabrication and Operation of Tubular Segmented‐In‐Series (SIS) Solid Oxide Fuel Cells (SOFC)

U. J. Yun, Jung Won Lee, S.‐B. Lee, Tak‐Hyoung Lim, Seong‐Jik Park, Rak‐Hyun Song, D.‐R. Shin

Fuel Cells · 2012 · 30 citations · 15 references

Concepts

Abstract

Abstract A tubular segmented‐in‐series (SIS) solid oxide fuel cell (SOFC) sub module for intermediate temperature (700–800 °C) operation was fabricated and operated in this study. For this purpose, we fabricated porous ceramic supports of 3 YSZ through an extrusion process and analyzed the basic properties of the ceramic support, such as visible microstructure, porosity, and mechanical strength, respectively. After that, we fabricated a tubular SIS SOFC single cell by using dip coating and vacuum slurry coating method in the case of electrode and electrolyte, and obtained at 800 °C a performance of about 400 mW cm –2 . To make a sub module for tubular SIS SOFC, ten tubular SIS SOFC single cells with an effective electrode area of 1.1 cm 2 were coated onto the surface of the prepared ceramic support and were connected in series by using Ag + glass interconnect between each single cell. The ten‐cell sub module of tubular SIS SOFC showed in 3% humidified H 2 and air at 800 °C a maximum power of ca. 390 mW cm –2 .

References

15