Industrial & Engineering Chemistry Research · 1998 · 157 citations · 9 references
EngineeringChemical EngineeringChemistryCatalysisHeat TransferReaction EngineeringBiomass ConversionBiomass Energy SystemsCatalytic MaterialsCatalytic Reaction EngineeringFluidized Bed ReactorsIndustrial CatalysisBiomass Conversion CatalysisCatalytic Biomass ConversionCatalytic Fluidized Bed ReactorsFlue Gas CompositionGasificationGasification In Fluidized BedsReforming CatalysisSteam Reforming
Four commercial catalysts for steam reforming of higher hydrocarbons (naphthas) and three for steam reforming of light hydrocarbons are tested for hot gas clean up and upgrading in biomass gasification with air in fluidized bed. The catalysts used originate from four manufacturers: BASF AG, ICI-Katalco, Haldor Topsoe a/s, and United Catalysts Inc. The work is performed in a small pilot plant (1−2 kg of biomass fed/h) with three reactors in series: gasifier, guard bed of dolomite, and full flow catalytic bed. Samples of gas are taken before and after the catalytic bed at different times-on-stream. It is shown how the H 2, CO, CO 2, CH 4 and steam contents in the flue gas change because of the catalytic bed approaching contents near to the ones corresponding to the equilibrium state. Variations in the heating value of the gas and gas yield as a result of the catalytic bed are also reported.
9
Ian Narváez, Alberto Orío, María Aznar et al. · Industrial & Engineering Chemistry Research · 1996 · 629 citations
Engineering, Agricultural Engineering, Solid Waste Management +15
Ian Narváez, José Corella, Alberto Orío · Industrial & Engineering Chemistry Research · 1997 · 146 citations