Fatigue & Fracture of Engineering Materials & Structures · 2008 · 74 citations · 24 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsSolid MechanicsDamage MechanicsFatigueFracture MechanicsMechanical CharacterizationStrain AnalysisStress-strain BehaviorAustenitic SteelsDuplex Stainless SteelsFatigue Damage AnalysisMicrocrack EvolutionMicrocrack FormationMicrocrack InitiationMicrocrack PropagationSurface Displacement Monitoring
ABSTRACT Strain field measurements by digital image correlation today offer new possibilities for analysing the mechanical behaviour of materials in situ during mechanical tests. The originality of the present study is to use this technique on the micro‐structural scale, in order to understand and to obtain quantitative values of the fatigue surface damage in a two‐phased alloy. In this paper, low‐cycle fatigue damage micromechanisms in an austenitic‐ferritic stainless steel are studied. Surface damage is observed in real time, with an in situ microscopic device, during a low‐cycle fatigue test performed at room temperature. Surface displacement and strain fields are calculated using digital image correlation from images taken during cycling. A detailed analysis of optical images and strain fields measured enables us to follow precisely the evolution of surface strain fields and the damage micromechanisms. Firstly, strain heterogeneities are observed in austenitic grains. Initially, the austenitic phase accommodates the cyclic plastic strain and is then followed by the ferritic phase. Microcrack initiation takes place at the ferrite/ferrite grain boundaries. Microcracks propagate to the neighbouring austenitic grains following the slip markings. Displacement and strain gradients indicate probable microcrack initiation sites.
24
Finite element formulation for a digital image correlation method
Yaofeng Sun, J.H.L. Pang, Chee Khuen Wong et al. · Applied Optics · 2005 · 224 citations
Engineering, Computational Engineering, Computational Mechanics +9