Microwave and Optical Technology Letters · 2011 · 15 citations · 5 references
EngineeringElectrical EngineeringAntennasMechatronic DesignMicrowave EngineeringImpedance MatchingMicrowave FiltersMicrowave ResonatorsMicrowave Transmission LinesTransmission LinesUltra-wideband CommunicationBandpass FilteringBandpass FiltersFractional BandwidthInsertion LossMatchingMicrostrip ResonatorsReturn LossStepped-impedance Filters
Abstract The design of a new UWB bandpass filter is proposed, which has a center tapped microstrip composite right/left‐handed transmission‐line zeroth‐order resonator (CRLH‐TL ZOR). In an attempt to reduce the size, instead of the conventional periodic CRLH‐TL, only one cell ZOR geometry is adopted and optimized to have the target UWB bandpass filtering. Along with this subwavelength filter, the matching parts working as a stepped impedance low‐pass filter are suggested for good matching and stopband enhancement. The proposed filter is shown to have the overall size of “0.69λ g × 0.73λ g ,” the fractional bandwidth over 100%, the insertion loss much less than 1 dB, and the flat group delay with an acceptable return loss performance in the predicted and measured results. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26170
5
Design and analysis of UWB band pass filter with ring filter
H. Ishida, Kenji Araki · 2004 · 220 citations
Marta Gil, Jordi Bonache, J. García‐García et al. · IEEE Transactions on Microwave Theory and Techniques · 2007 · 180 citations