IEICE Transactions on Communications · 2010 · 16 citations · 6 references
EngineeringElectrical EngineeringElectromagneticsMicrowave EngineeringWireless CommunicationsMicrostrip CircuitsMicrowave Integrated CircuitsMicrowave Network AnalysisMicrowave Noise AnalysisMicrowave System DesignMicrowave Transmission LinesBloch TheoremDispersion AnalysisFull-wave Electromagnetic SimulationFull-wave ModelingHigh-frequency ElectronicsNoise PropagationResonance Frequencies
A novel approach is proposed for miniaturizing the unit cell size of electromagnetic bandgap (EBG) structures that suppress power plane noise. In this approach, open stubs are introduced into the shunt circuits of these EBG structures. Since the stub length determines the resonant frequencies of the shunt circuit, the proposed structures can maintain the bandgaps at lower frequencies without increasing the unit cell size. The bandgap frequencies were estimated by dispersion analysis based on the Bloch theorem and full-wave simulations. Sample boards of the proposed EBG structures were fabricated with a unit cell size of 2.1mm. Highly suppressed noise propagation over the estimated frequency range of 1.9-3.6GHz including the 2.4-GHz wireless-LAN band was experimentally demonstrated.
6
Ramesh Abhari, George V. Eleftheriades · IEEE Transactions on Microwave Theory and Techniques · 2003 · 350 citations
Tzong‐Lin Wu, Yen-Hui Lin, Ting-Kuang Wang et al. · IEEE Transactions on Microwave Theory and Techniques · 2005 · 235 citations