Influence of Carbon on the Hot Corrosion Behaviour of Fe-Base Alloys

A.U. Malik, Mohammad Ishaq, Sharif Ahmad, Sultan Ahmad

Materials Transactions JIM · 1989 · 11 citations · 5 references

Concepts

Abstract

The annealed and polished specimens of Fe–5M–C (M=Ni, Cr, W, Ta, Ti, V and Nb) containing 0, 0.1, 0.4, 0.8 and 1.2 mass% of C were used for high temperature oxidation and hot corrosion studies. For hot corrosion studies, samples were coated with saturated solution of Na2SO4 and NaCl by the spray technique. The hot corrosion and plain oxidation runs were carried out on a helical thermo-balance for a period of 28.8 ks in the temperature range of 973–1123 K.It is found that the hot corrosion is a function of carbon content and temperature. There is an increase in hot corrosion rate with increasing temperature. The carbon provides a carbide network, which gives a convenient route for the internal penetration of salt into the alloy. W-containing alloys are resistant to plain oxidation as well as hot corrosion. The Ni-containing alloys gives better oxidation performance than the Cr-containing alloys. Unlike the hot corrosion of Ni- and Co-base superalloys, Fe-base alloys show a mixed mechanism of oxidation, sulphidation, fluxing and chlorination during hot corrosion.

References

5