ChemSusChem · 2015 · 198 citations · 30 references
Natural SciencesChemical EngineeringChemistryCatalysisIndustrial ChemistryReaction EngineeringCatalyst DesignCatalytic MaterialsCatalytic MechanismsCatalytic Reaction EngineeringIndustrial Catalytic ProcessesSupported CatalystsHydrogenationHydrogenation CatalysisHydrogenation ReactionsOptimum TemperatureSelectivitySolvent EffectsSolvent Effects On CatalysisTemperature Optimum
The hydrogenation of furfural to furfuryl alcohol was performed in the presence of a Co/SBA-15 catalyst. High selectivity (96 %) at a conversion higher than 95 % is reported over this catalytic system. As the conversion of furfural to furfuryl alcohol occurs over metallic Co sites, the effect of reduction temperature, H2 pressure, and reaction temperature were studied. Optimum reaction conditions were: 150 °C, 1.5 h, 2.0 MPa of H2 . The catalyst was recyclable, and furfuryl alcohol was recovered with a purity higher than 90 %. The effect of the solvent concentration was also studied. With a minimum of 50 wt % of solvent, the selectivity to furfuryl alcohol and the conversion of furfural remained high (both over 80 %). Likewise, the activity of the catalyst is maintained even in pure furfural, which confirms the real potential of the proposed catalytic system. This catalyst was also used in the hydrogenation of levulinic acid to produce γ-valerolactone selectively.
30
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Dongyuan Zhao, Jianglin Feng, Qisheng Huo et al. · Science · 1998 · 11.6K citations
γ-Valerolactone—a sustainable liquid for energy and carbon-based chemicals
István T. Horváth, Mehdi Hasan, Viktória Fábos et al. · Green Chemistry · 2007 · 977 citations
Agriculture, Chemistry, Food Science +12
Kinetics and mechanism of hydrogenation of furfural on Cu/SiO2 catalysts
Surapas Sitthisa, Tawan Sooknoi, Yuguang Ma et al. · Journal of Catalysis · 2010 · 585 citations