American journal of materials science · 2014 · 11 citations · 27 references
Open access
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMaterials ChemistryThin FilmsSemiconductor Device MaterialsSemiconductor Thin FilmsThin Film AnnealingThin Film Electrical PropertiesThin-film DepositionThin-film MaterialsAbsorbent MaterialsElectrical PropertiesElectrical Properties AnalysisElectrostatic Spray DepositionFilm ThicknessPrecursor ChemistrySpray PyrolysisX-ray Diffraction Analysis
In this work we deposited Cu2ZnSnS4 (CZTS) thin films on soda-lime glass (SLG) substrate using electrostatic field-assisted low-cost spray pyrolysis technique. The precursor solution, consisting of Cu2Cl, ZnCl2, SnCl4 and thiourea at optimized concentrations, was sprayed onto a heated SLG substrate at a flow rate of 0.33ml/min. Spray deposition was carried out at substrate temperatures of 300℃ with varying precursor concentrations. After deposition of the CZTS thin films, the films were annealed at a temperature of 350℃ in argon atmosphere for 60minutes. The Structural characterization of the annealed CZTS film was carried out by X-ray diffraction (XRD) while the film thickness, micrograph, optical and electrical properties were measured using Veeco Dektak 150 Stylus profiler, Carl Zeiss Optical interference microscope, UV-Vis-NIR spectroscopy and four point probe techniques respectively. The result obtained from the XRD showed a peak at the 2θ position of 31.7200° with a FWHM of 0.3600° and d-spacing of 2.81863A. The annealed CZTS films exhibited excellent polycrystalline orthorhombic structure from XRD measurements. The average sheet resistance of the films is in the region of 7.264X10 7 Ωsq from a thickness of 100nm under dark conditions. The film micrograph obtained at 1,000x using the Carl Zeiss optical interference microscope showed light agglomeration of grains and voids of sparcely dispersed films.
27