Electric Vehicle Battery Charging/Swap Stations in Distribution Systems: Comparison Study and Optimal Planning

Yu Zheng, Zhao Yang Dong, Yan Xu, Ke Meng, Jun Zhao, Jing Qiu

IEEE Transactions on Power Systems · 2013 · 520 citations · 27 references

Concepts

TL;DR

Electric vehicles promise reduced environmental impact, but their charging demands require reinforced distribution networks, making strategic station placement and scaling essential to control costs. The paper proposes a life‑cycle‑cost based framework for optimally designing battery charging and swap stations in distribution systems. The framework models rapid‑charging and battery‑swap stations, evaluates them using a life‑cycle‑cost criterion, and solves the optimal placement and sizing problem with a modified differential evolution algorithm. Validation on IEEE 15‑bus and 43‑bus systems shows that battery‑swap stations are more suitable for public transportation than rapid‑charging stations.

Abstract

Electric vehicle (EV) is a promising technology for reducing environmental impacts of road transport. In this paper, a framework for optimal design of battery charging/swap stations in distribution systems based on life cycle cost (LCC) is presented. The battery charging/swap station models are developed to compare the impacts of rapid-charging stations and battery swap stations. Meanwhile, in order to meet the requirements of increased power provided during the charging period, the distribution network should be reinforced. In order to control this reinforcement cost, stations should be placed at appropriate places and be scaled correctly. For optimal cost-benefit analysis and safety operation, the LCC criterion is used to assess the project and a modified differential evolution algorithm is adopted to solve the problem. The proposed method has been verified on the modified IEEE 15-bus and 43-bus radial distribution systems. The results show that battery swap station is more suitable for public transportation in distribution systems.

References

27