2009 · 45 citations · 0 references
EngineeringChemical EngineeringCombustionFlow AssuranceFlow VisualizationBiofuel ProductionCombustion FundamentalsFuel Injection SystemsSpray CombustionAtomizationAtomization ProcessesBiodieselFuel Spray AtomizationFuel Spray CharacteristicsSpray AtomizationVegetable Oil FuelsViscosity
Recent research on biofuels for power generation has typically focused on biodiesel because the biodiesel feedstrock, e.g., vegetable oil, poses significant combustion problems related to poor atomization. Existing injectors cannot effectively atomize high viscosity fuels such as vegetable oil. However, a new, novel flow-blurring (FB) injector concept has shown promise in overcoming the atomization problems. In this study, a FB injector is compared to a commercial air-blast (AB) injector operated with water at ambient conditions of temperature and pressure. Laser sheet visualization and Phase Doppler Particle Analyzer (PDPA) systems are used to obtain the spray characteristics for a range of air to liquid (ALR) ratios. Results show significant difference in distributions of Sauter Mean Diameters (SMDs), and mean and root-mean square axial velocity for the two injectors operated at a fixed ALR. In comparison to the AB injector, the FB injector produced spray with smaller SMDs, a smaller SMD range over the spray volume, higher RMS and mean axial velocities in the center region, and a compact spray with spray angle nearly independent of ALR. Results show that the FB injector is an effective way of atomizing liquids at relatively low ALRs compared to a traditional AB injector, without the additional pressure drop penalty.