Characterization of Zero Mass Flux Flow Control for Separation Control of an Adaptive Airfoil

Nan Jou Pern, Jamey Jacob, Ray Lebeau

3rd AIAA Flow Control Conference · 2006 · 25 citations · 20 references

Concepts

Abstract

The adaptive airfoil is a type of zero mass flux flow control device. An adaptive wing was constructed with a base profile of a NACA 4415 airfoil to house an array of unimorph piezoelectric actuators, wrapped with a layer of smooth rubber latex. This flow control method has been investigated across a range of steady and actuation frequencies of order f+ = O(1), angle of attack between α = 0 ◦ and α = 24◦, and at Re of 2.5 · 104, 5.0 · 104, 7.5 · 104, and 1.0 · 105. Several experimental and computational techniques have been used for investigation. First, a laser displacement sensor system is used to characterize the oscillation of the upper surface. There is a phase lag between the input signal and the surface response of 15 ◦ to 90 ◦ for the frequencies that are investigated. Then, flow field data is obtained using PIV. Next, lift and drag are measured using a force balance. Lastly, numerical simulation is performed. Phase-locked PIV reveals that a cross-stream vortex is formed by the upward motion of the surface, and the vortex advects downstream. Lift and drag curves together with smoke wire flow visualization suggest that for f+>.1, the flow control effectiveness is at a maximum. It is evident that frequency is the key factor in the adaptive wing flow control mechanism. Nomenclature c chord length CD drag coefficient CL lift coefficient f+ reduced frequency, f · `/U∞ FSTI Freestream turbulence intensity ` distance from leading edge to x coordinate of maximum deflection L/D lift to drag ratio Re Reynolds number based on chord length, c U ∞ free stream velocity α angle of attack δ ∗ displacement thickness, δ ∗ = ∫ h

References

20