Journal of Applied Physics · 2001 · 44 citations · 15 references
Natural SciencesMaterials SciencePhysicsMaterials CharacterizationMechanical Behavior Of MaterialsThin FilmsMetal MaterialsMetalsPlasticityThin Film Mechanical PropertiesThin-film MaterialsBrillouin ScatteringElastic ConstantsElastic ModuliMetal Thin FilmsMetallic Thin FilmsMicrostructural Evolution During AnnealingThin Film Mechanics
Brillouin scattering has been used to investigate the elastic properties of CuxMo1−x thin films with thicknesses varying from 200 up to 430 nm, elaborated by ion beam sputtering. Two compositions around Cu30Mo70 and Cu70Mo30 and pure Cu and Mo films have been studied. The samples are essentially randomly oriented polycrystals, leading to an isotropic effective symmetry. By fitting all the Brillouin spectral lines, two independent effective elastic constants of these films have been determined, allowing the calculation of their elastic moduli. Results indicate that pure copper thin films’ elastic properties are similar to the bulk copper ones whereas pure molybdenum thin films' Young's modulus is weaker (about 10%) than the bulk Mo one. Concerning Cu–Mo solid solutions, elastic constants values lie between pure copper and molybdenum ones. Finally, the effect of annealing at 760 K on the mechanical properties of the solid solutions in relation with the microstructural evolution is discussed. The annealed solid solutions show a hardening of the elastic moduli with respect to the as-deposited samples, which is supposed to reflect their full demixing.
15
Surface generation and detection of phonons by picosecond light pulses
C. Thomsen, H. T. Grahn, Humphrey J. Maris et al. · Physical review. B, Condensed matter · 1986 · 1.6K citations
Theory of Surface-Ripple Brillouin Scattering by Solids
R. Loudon · Physical Review Letters · 1978 · 150 citations