Journal of Electromagnetic Waves and Applications · 2007 · 62 citations · 14 references
EngineeringElectrical EngineeringAdaptive RadiationAntennasMicrowave EngineeringAntenna DesignAntenna ParametersBroadband AntennasHorn AntennasMicrowave AntennasSmall AntennasBroadband Horn AntennasDouble-ridged Horn AntennasFeedingHorn Antenna DesignHorn Antenna Design OptimizationMicrowave Horn AntennasRadiation Pattern AnalysisRidged Horn Antennas
A new design of a broadband 1–18 GHz double ridged guide horn antenna with redesigned feeding section is presented. Several modifications are made in the structure of a conventional double ridged guide horn antenna in order to overcome the deterioration of its radiation pattern at higher frequencies. Using the results of a sensitivity analysis of the most important parameters of the modified structure, it has been optimized by employing the interpolated quasi-Newton method. The resulting antenna not only does not suffer from the known deficiencies of a conventional antenna, but also has smaller physical dimensions and enjoys a better EM performance compared with the conventional one. The feeding section of this antenna is redesigned and the whole antenna has been optimized again to achieve a better VSWR. These modifications resulted in a VSWR of less than 2.7 at lower end of the frequency band and less than 1.8 at the upper end of the band. Reduction in the weight of the antenna and ease of construction are two other advantages of the new antenna.
14
Properties of Ridge Wave Guide
S.B. Cohn · Proceedings of the IRE · 1947 · 312 citations
Short axial length broad-band horns
John L. Kerr · IRE Transactions on Antennas and Propagation · 1973 · 106 citations
An aperture-matched horn design
W. D. Burnside, C. Chuang · IRE Transactions on Antennas and Propagation · 1982 · 61 citations