A Dual-Band Bandpass Filter Using a Single Dual-Mode Ring Resonator

Abstract

A simple microstrip ring-resonator is presented for novel design of dual-band dual-mode bandpass filters with good isolation and upper-stopband performance. By increasing the length of the loaded open-circuited stub, the two first-order degenerate modes are excited and slit for the use of the first passband, while one of the third-order degenerate modes moves downward and forms the second passband together with a second-order degenerate mode. Meanwhile, three transmission zeros are properly tuned for the rejections between the two passbands and in the upper stopband. After installing two coupled-line sections on a square ring at the two ports with 90°-separation, a dual-band filter with the two transmission poles in each passband is designed and measured. Without adding any additional perturbation element inside the ring, the measured filter shows good performance for both in-band matching and outside rejections of the desired dual passbands.