IEEE Transactions on Antennas and Propagation · 2014 · 134 citations · 27 references
EngineeringElectrical EngineeringAntennasMicrowave EngineeringPhotonicsAntenna DesignAntenna GainAntenna SimulationBroadband AntennasMicrowave AntennasPlanar AntennasBandwidthBroadband Antenna DesignFabry-perot ResonatorsGain BandwidthGain-bandwidth ProductHigh-gain AntennasMetasurfacesPeriodic Antenna Arrays
A method for designing sub-wavelength-profile and broadband high-gain planar antennas is presented. A novel multi-layer periodic array design is proposed for sub-wavelength Fabry-Perot cavity type antennas with enhanced bandwidth performance. Three double-sided periodic arrays are designed and optimized, each double-sided array consisting of a capacitive artificial impedance surface (AIS) and an inductive partially reflective surface (PRS) printed on either side of a dielectric substrate. They are placed at about sixth of a wavelength from a ground plane and from each other. Thus, three air cavities are created with a total profile of λ/2. The proposed antenna has been simulated using CST Microwave Studio and measured achieving 16.9 dBi directivity with 10.7% 3 dB bandwidth. The gain-bandwidth product of the proposed designs outperforms any previous Fabry-Perot antenna design with this profile.
27
A Metamaterial for Directive Emission
Stéfan Enoch, Gérard Tayeb, Pierre Sabouroux et al. · Physical Review Letters · 2002 · 1.2K citations
David R. Jackson, Christophe Caloz, T. Itoh · Proceedings of the IEEE · 2012 · 1.1K citations
Partially reflecting sheet arrays
G. v. Trentini · IRE Transactions on Antennas and Propagation · 1956 · 1.1K citations