The recycling of incinerated sewage sludge ash as a raw material for CaO–Al₂O₃–SiO₂–P₂O₅glass-ceramic production

AbstractIn this paper, the recycling of incinerated sewage sludge ash (ISSA) into glass-ceramic materials by a two-stage sintering cycle of nucleation stage and crystallization stage without any pressure and binder is presented. The parent glasses were subjected to the following nucleation/crystallization temperature and time level: (A) 790°C, 1.0 h/870°C, 1.0–3.0 h; (B) 790°C, 1.0 h/945°C, 1.0–3.0 h and (C) 790°C, 1.0 h/1065°C, 1.0–3.0 h. X-ray power diffraction analysis results revealed that multiple crystalline phases coexisted in the glass-ceramic materials and the crystalline phase compositions were more affected by crystallization temperature than crystallization time. Scanning electron microscopy analysis showed an interlocking microstructure of glass phases and crystals with different sizes and spatial distribution. The glass-ceramics crystallized at 945°C for 2.0 h exhibited optimal properties of density of 2.88 ± 0.08 g/cm3, compression strength of 247 ± 12 MPa, bending strength of 118 ± 14 MPa and water absorption of 0.42 ± 0.04. The leaching concentrations of heavy metals were far lower than the limits required by the regulatory standard of EPA. This paper provides a feasible, low-cost and promising method to produce ISSA-based glass-ceramics and highlights the principal characteristics that must be taken into account to use ISSA correctly in glass-ceramics.Keywords: glass-ceramicheavy metalincinerated sewage sludge ashmelting/sinteringwaste recycling Disclosure statementNo potential conflict of interest was reported by the author(s).