Impulse response shortening for discrete multitone transceivers

P.J.W. Melsa, Richard Younce, C.E. Rohrs

IEEE Transactions on Communications · 1996 · 508 citations · 11 references

Concepts

TL;DR

In discrete multitone transceivers, a cyclic prefix guards against intersymbol interference, but its length—determined by the channel’s impulse response—reduces throughput, prompting the use of short FIR filters to shorten the impulse response, a concern that also applies to full‑duplex echo paths affecting computational load. The study investigates coefficient‑design methods for a short FIR filter to shorten the channel impulse response, including a computationally efficient LS variant and a joint‑shortening paradigm with three techniques to reduce CP length and echo‑canceller complexity. The authors develop an optimal shortening method and a least‑squares approach, and introduce a joint‑shortening paradigm with three techniques that simultaneously shorten the channel and echo impulse responses to reduce CP length and echo‑canceller computational demands.

Abstract

In discrete multitone (DMT) transceivers an intelligent guard time sequence, called a cyclic prefix (CP), is inserted between symbols to ensure that samples from one symbol do not interfere with the samples of another symbol. The length of the CP is determined by the length of the impulse response of the effective physical channel. Using a long CP reduces the throughput of the transceiver, To avoid using a long CP, a short time-domain finite impulse response (FIR) filter is used to shorten the effective channels impulse response. This paper explores various methods of determining the coefficients for this time-domain filter. An optimal shortening and a least-squares (LS) approach are developed for shortening the channel's impulse response. To provide a computationally efficient algorithm a variation of the LS approach is explored. In full-duplex transceivers the length of the effective echo path impacts the computational requirements of the transceiver. A new paradigm of joint shortening is introduced and three methods are developed to jointly shorten the channel and the echo impulse responses in order to reduce the length of the CP and reduce computational requirements for the echo canceller.

References

11