Journal of Applied Physics · 2008 · 34 citations · 16 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsNanomaterialsFerroelectric MaterialsNanocompositesNanowiresPiezoelectric ActuationPiezoelectric CeramicsPiezoelectric MaterialsElectromechanical CouplingElectrospun NanofibersMonolithic CeramicsPiezoelectric CompositesPiezoelectric NanomaterialsPiezoelectric NanowiresPiezoelectric Sensing
The use of monolithic piezoceramic materials in sensing and actuation applications has become quite common over the past decade. However, these materials have several properties that limit their application in practical systems. These materials are very brittle due to the ceramic nature of the monolithic material, making them vulnerable to accidental breakage during handling and bonding procedures. In addition, they have very poor ability to conform to curved surfaces and result in large add-on mass associated with using a typically lead-based ceramic. These limitations have motivated the development of alternative methods of applying the piezoceramic material, including piezoceramic fiber composites and piezoelectric 0-3 composites (also known as piezoelectric paint). Piezoelectric paint is desirable because it can be spayed or painted on and can be used with abnormal surfaces. However, the piezoelectric paint developed in prior studies has resulted in low coupling, limiting its application. In order to increase the coupling of the piezoelectric paint, this effort has investigated the use of piezoelectric nanowires rather than spherical piezoelectric particle, which are difficult to strain when embedded in a polymer matrix. The piezoceramic wires were electrospun from a barium titanate (BaTiO3) sol gel to produce fibers with 500–1000nm diameters and subsequently calcinated to acquire perovskite BaTiO3. An active nanocomposite paint was formed using the resulting piezoelectric wires and was compared to the same paint with piezoelectric nanoparticles. The results show that the piezoceramic wires produce 0-3 nanocomposites with as high as 300% increase in electromechanical coupling.
16
Electrospinning of Nanofibers: Reinventing the Wheel?
Dan Li, Yier Xia · Advanced Materials · 2004 · 5.4K citations
Natural Sciences, Materials Engineering, Materials Science +13
Thandavamoorthy Subbiah, Gajanan Bhat, Richard W. Tock et al. · Journal of Applied Polymer Science · 2005 · 1.7K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +15
Electrospinning and electrically forced jets. I. Stability theory
Moses M. Hohman, Michael Shin, Gregory C. Rutledge et al. · Physics of Fluids · 2001 · 1K citations
Electrospinning and electrically forced jets. II. Applications
Moses M. Hohman, Michael Shin, Gregory C. Rutledge et al. · Physics of Fluids · 2001 · 691 citations