Journal of Analytical Atomic Spectrometry · 2012 · 83 citations · 49 references
PharmacyChemical EngineeringChemistryAnalytical ChemistryInorganic ChemistrySeparation ScienceElemental Composition AnalysisInorganic Elemental AnalysisIron OxidesMagnetic SeparationNanoparticle CharacterizationSolid-phase ExtractionAdsorbent CharacterizationDesorptionFlame Atomic Absorption SpectrometryFlame Atomic Absorption SpectroscopyGraphite Furnace Atomic Absorption SpectrometryMagnetic NanoparticlesSilica-based SorbentsSonication
A new magnetic solid sorbent was synthesized using 3-mercaptopropionic acid grafted silica modified Fe3O4 magnetic nanoparticles. The sorbent was characterized by SEM, XRD, and FT-IR and used for solid phase extraction of Al3+ and Cr3+ ions. Al3+ and Cr3+ ions were measured by graphite furnace and flame atomic absorption spectrometry, respectively. The optimal extraction/preconcentration conditions including pH of sample solution, desorption conditions (type, concentration, and volume of the eluent), sonication time, sample volume, adsorbent amount, and interfering ions were studied. Under optimal conditions, the detection limits of 0.09 and 0.19 ng mL−1 were obtained with a relative standard deviation (RSD%) of 2.1–5.2% for Al3+ and Cr3+ ions, respectively. The enrichment factors were found to be 99 and 92 for Al3+ and Cr3+ ions, respectively. The effects of various cationic interferences on percent recovery of Al3+ and Cr3+ ions were studied. The developed method was successfully applied for selective extraction and preconcentration of trace amounts of Al3+ and Cr3+ in biological and environmental samples.
49
Mohammad Faraji, Yadollah Yamini, Abolfazl Saleh et al. · Analytica Chimica Acta · 2009 · 273 citations
Pharmacy, Chemistry, Toxicology +17
Jibrin Sabo Suleiman, Bing Hu, Hanyong Peng et al. · Talanta · 2008 · 214 citations