THERMAL SHOCK EFFECT ON THE TRANSVERSE STRENGTH OF CLAY BODIES ¹

Abstract

ABSTRACT Test specimens of twenty commercial shale and fireclay bodies, ranging in softening point from cones 7 to 30, were fired in laboratory kilns to cones 04, 2, and 6. Comparisons of transverse strength before and after thermal shock were made, thermal shock h a i h g been produced by eight cycles of heating in a furnace at 1100°F for 15 minutes and cooling over an air blast for an equal length of time. Results indicate that as initial strength increases, per cent reduction in strength increases and strength after thermal shock increases to a maximum and then declines. Curves are fitted to the data and the mathematical relationships are shown. The results of other investigators are discussed.