A study of surface dynamics of polymers. III. Surface dynamic stabilization by plasma polymerization

Abstract

Abstract As demonstrated in Part II of this series of studies, the hydrophobic character of CF 4 plasma‐treated Nylon 6 and poly(ethylene terephthalate) (PET) decay with time of water immersion, and the rate of decay can be used as a measure for the surface mobility of (substrate) polymers. The same method of using fluorine‐containing moieties introduced by CF 4 plasma treatment as surface labeling is applied to investigate the influence of a thin layer of plasma polymer of methane applied onto the surface of those polymers. An ultrathin layer of plasma polymer provides a barrier to the rotational and diffusional migration of the introduced chemical moieties from the surface into the bulk of the film. The influence of operational parameters of plasma polymerization on the surface dynamic stability are examined by measuring the decay rate constants for (subsequently) CF 4 plasma‐treated samples. The rate constant was found to decrease sharply with increasing value of plasma energy input manifested by J/kg monomer, and no decay was observed as the energy input reached a threshold value (about 6.5 GJ/kg for PET, about 7.0 GJ/kg for Nylon 6), indicating that unperturbable surfaces can be created by means of plasma polymerization.