Electromagnetics · 2009 · 12 citations · 20 references
EngineeringElectrical EngineeringCircuit TheoryMicroelectronicsMicrowave EngineeringImpedance MatchingImpedance Matching CircuitsMicrostrip CircuitsMicrowave Integrated CircuitsPower DividersTransmission LinesDividersEqual Power DivisionIsolationMicrostrip Transmission LinesMicrostrip Wilkinson Power DividersPower DivisionUnequal Power DivisionWilkinson Power Divider
Abstract An unequal dual-frequency Wilkinson power divider with a novel structure and analytical design method is presented in this article. A new asymmetric structure consisting of a parallel open-circuited transmission line stub and eight sections of transmission lines is proposed, and this structure can satisfy rigorous unequal power division and impedance matching theoretically. Considering that the transmission line stub has the equivalent characteristics of reactive lumped elements (such as inductors and capacitors), a single resistor R is only used in the isolation structure to obtain ideal isolation between two output ports of this proposed unequal dual-frequency power divider. For verification, simulated results of two examples are shown first, and it can be observed that ideal matching at three ports, perfect isolation between two output ports, and accurate unequal power division can be simultaneously achievable at desired two frequencies. Finally, comparison results of simulation and measurement of a practical microstrip example verify this proposed power divider experimentally.
20
A dual-frequency wilkinson power divider
Lei Wu, Zengguang Sun, H. Yilmaz et al. · IEEE Transactions on Microwave Theory and Techniques · 2006 · 312 citations
Engineering, Electrical Engineering, Microwave Engineering +15