Fuel Cells · 2004 · 55 citations · 10 references
EngineeringChemical EngineeringEnvironmental EngineeringElectrochemical EngineeringElectrochemistryPower ElectronicsElectrochemical Cell DesignElectrochemical CellsElectrochemical Energy StorageEnergy StorageFuel Cell MembranesFuel CellsFuel Cell Performance ModelingFuel Cell SystemsHydrogen Consumption ReductionHydrogen ProductionOperating ConditionsPolymer Electrolyte MembranesPolymer Electrolyte SimulationPolymer Electrolyte Transport
Abstract The polymer electrolyte fuel cell (PEFC) system is considered as an alternative power source and is particularly promising for mobile applications. This paper reports some experimental results performed on a PEFC stack, operating in anodic dead end mode. The flush frequency of the anode is investigated. In order to reduce hydrogen consumption in an embedded application, the flush frequency could be calculated from system modelling, according to the operating conditions. The first step of such a model is presented. It simulates the water exchanges between the anode and cathode channels in the anode dead end case. It has been implemented in a MATLAB® environment.
10
Two‐dimensional model for proton exchange membrane fuel cells
Vladimir Gurau, Hongtan Liu, S. Kakaç · AIChE Journal · 1998 · 587 citations
Dilip Natarajan, Trung Van Nguyen · Journal of The Electrochemical Society · 2001 · 473 citations
Engineering, Chemical Engineering, Electrochemical Engineering +16