Procedia Chemistry · 2009 · 12 citations · 6 references
EngineeringMaterials EngineeringMaterials ScienceNanomaterialsNanotechnologySensorsGas SensorsMetal Oxide NanomaterialsNanosensorsSensor MaterialsLinearityLinearity AssessmentMetal Oxide Gas SensorsMetal Oxide Sensor MaterialsMicrostructureNanomaterial-based SensorsNanostructured Sensor MaterialsSensor Response Characterization
To fabricate more excellent NO2 sensor with high sensor response and good linearity between the sensor response and NO2 concentration, the microstructure of WO3 lamellae was controlled by adding nano-particles of SnO2. It was found that the sintering of WO3 lamellae was inhibited by adding nano-particles of SnO2. The device using WO3 lamellae added a small amount of SnO2 nano-particles had the highest sensor response, exhibiting a high sensor response (S = 60-540) even to dilute NO2 (100–1000 ppb) in air at 200°C.
6
Wet process-prepared thick films of WO3 for NO2 sensing
Yong-Gyu Choi, Go Sakai, Kengo Shimanoe et al. · Sensors and Actuators B Chemical · 2003 · 61 citations